Metamark
Metamark MetaWrap MD-X White Gloss Cylinder Cast Wrap Film, 54 in × 55 yd
Metamark MetaWrap MD-X White Gloss Cylinder Cast Wrap Film, 54 in × 55 yd
SKU:MD-X-100-137
Couldn't load pickup availability
MetaWrap MD-X is a cylinder-cast printable film for vehicle graphics over compound curves and moderate recesses. Its permanent grey MetaScape adhesive provides air-release channels and helps limit substrate show-through. The family is matched with MetaGuard MG-X overlaminate.
- SKU: MD-X-100-137
- Roll size: 54 in × 55 yd
- Finish: White Gloss (with Air-Egress)
- Film: Cylinder-cast vinyl, 50 µm nominal
- Adhesive: MetaScape permanent grey solvent-based acrylic with air-release channels
- Release liner: Structured layflat kraft with PE coating, 140 gsm nominal
- Matched overlaminate: MetaGuard MG-X
Test print and confirm substrate suitability. Allow inks to cure before lamination or vehicle application. Install dry, follow the manufacturer’s heat and post-heating guidance, and avoid overstretching.
Manufacturer technical and application resources
- MetaWrap MD-X technical data sheet (PDF): V1.2_26; exact family construction, printing, drying, dry application and storage.
- MetaWrap MD-X vehicle-wrap application guide (PDF): surface preparation, panel layout, installation and post-heating for this matched system.
- Metamark regional durability guide (PDF): climate-zone and exposure context; the family-sheet figures are not a blanket US finished-graphic guarantee.
- Cleaning and Maintenance of Vehicle Wraps (PDF): wrap-specific cleaning and aftercare precautions for printed graphics protected with a vinyl overlaminate.
Use the product-specific sheet and wrap guide together. Install dry, allow the printed film to out-gas fully before laminating and installing, and follow the family-specific fitting and post-heating instructions. A shorter general lamination drying interval must not replace the wrap-system guidance. Test the actual substrate and print process; do not overstretch.
The guide distinguishes air-release MD-X for modest recesses from MD-XB for deeper recesses. This white gloss MD-X-100-137 is not MD-XB or the non-MetaScape clear MD-X option.
Manufacturer documents include metric family presentations and other constructions. They do not replace the exact US SKU, finish or roll dimensions listed above. These links do not create a bundled kit, guarantee stock availability or establish a finished-graphic warranty.
Matched films and overlaminates
For this 54 in × 55 yd MD-X white gloss film, the manufacturer names MetaGuard MG-X as its matched overlaminate. Choose the same-width, same-length MG-X clear matte, 54 in × 55 yd or MG-X clear gloss, 54 in × 55 yd.
Use the MD-X guide’s modest-recess limits; do not transfer the deeper-recess guidance for MD-XB to this film.
These recommendations are limited to solvent, eco-solvent and latex prints. Confirm the actual print system before use; the film’s ability to accept UV ink does not establish compatibility with every UV-printed laminate system.
Follow both product sheets and the matched wrap-system guide. Allow inks to cure fully, install dry, and use the specified fitting and post-heating process. Test the actual ink and surface. These links are for separately purchased rolls, not a bundled kit, a stock-availability promise or a finished-graphic warranty.
About the application photo: Manufacturer MetaWrap MD-X family application example. Representative graphics only; exact finish, US sale roll and packaging are not shown.
Selecting your material
Selecting your material
Select every available option, then check the size, color, SKU and price before adding to your cart. Product specifications and application information are included in the description above.
Need help matching a material or choosing a size? Call 330-747-6139 or text us.
Shipping & order questions
Shipping & order questions
Review the shipping and availability details for your selected item. For oversized rolls, unusual quantities or a delivery deadline, contact us before ordering so we can confirm the details.
