Metamark
Metamark MDP-HB White Gloss High-Tack Blockout Print Vinyl, 54 in × 55 yd
Metamark MDP-HB White Gloss High-Tack Blockout Print Vinyl, 54 in × 55 yd
SKU:MDPHB-200-137
Couldn't load pickup availability
MDP-HB is a monomeric print vinyl with a high-tack permanent grey adhesive for suitable smooth low-energy surfaces. The grey adhesive helps reduce substrate show-through, while the 100 µm film gives handling body for print-and-cut graphics. The family is matched with MetaGuard MG-300 overlaminates.
- SKU: MDPHB-200-137
- Roll size: 54 in × 55 yd
- Finish: White Gloss
- Film: Monomeric calendered vinyl, 100 µm nominal
- Adhesive: High-tack permanent grey solvent-based acrylic
- Release liner: Layflat kraft with PE coating, 140 gsm nominal
- Matched overlaminate: MetaGuard MG-300 family
Test adhesion and printing on the intended substrate and allow inks to cure. Apply unstressed; not suitable over rivets or complex recesses. Follow the manufacturer’s wet- or dry-application guidance and confirm the complete graphic system.
Manufacturer technical and application resources
- Metamark MDP-HB technical data sheet (PDF): exact high-tack blockout family sheet, including MDP-HB-200 White Gloss.
- Metamark regional durability guide (PDF): climate-zone and exposure context, not a blanket US finished-graphic guarantee.
- Cleaning and Maintenance of Vinyl (PDF): for printed graphics protected with a vinyl overlaminate, not cleaning directly on unprotected print.
This is the high-tack permanent grey-adhesive MDP-HB construction for suitable smooth low-energy surfaces, not standard MDP or removable MDP-R. Test the actual material and allow the printed inks to cure before application or lamination.
Apply unstressed and retain the exclusion of rivets and complex recesses. Use the film-specific wet-or-dry guidance only where the actual substrate and graphic permit it. The MG-300 family match is not floor-slip approval or compatibility with every print process.
Manufacturer family documents may show metric presentations and other finishes or constructions. They do not replace the exact US SKU, offered configuration or roll dimensions above, establish current availability, or supply missing stock-specific attributes. Confirm the actual substrate, ink and complete graphic system before production.
Matched films and overlaminates
The exact MDP-HB white gloss high-tack blockout film technical sheet names MetaGuard MG-300 as its matched laminate family. The MG-302 clear matte overlaminate, 54 in × 55 yd matches this 54-inch-wide, 55-yard film.
This recommendation is for suitable non-floor graphics. MG-302 matte is not a floor-rated substitute for FloorArt or another validated floor system, and high-tack adhesive does not make every substrate suitable.
These recommendations are limited to solvent, eco-solvent and latex prints. Confirm the actual print system before use; the film’s ability to accept UV ink does not establish compatibility with every UV-printed laminate system.
Follow both exact product sheets, allow the printed inks to cure fully and test the actual printed film before lamination. Use the specified cold-lamination process on flat or gently curved graphics. These separately purchased rolls are not a kit, a stock-availability promise or a finished-graphic warranty.
About the application photo: Manufacturer MDP-HB family application example. Representative graphics only; exact finish, US sale roll and packaging are not shown.
Selecting your material
Selecting your material
Select every available option, then check the size, color, SKU and price before adding to your cart. Product specifications and application information are included in the description above.
Need help matching a material or choosing a size? Call 330-747-6139 or text us.
Shipping & order questions
Shipping & order questions
Review the shipping and availability details for your selected item. For oversized rolls, unusual quantities or a delivery deadline, contact us before ordering so we can confirm the details.
