Metamark
Metamark MetaGuard MG-X Clear Matte and Gloss Cylinder Cast Overlaminate, 54 in × 55 yd
Metamark MetaGuard MG-X Clear Matte and Gloss Cylinder Cast Overlaminate, 54 in × 55 yd
SKU:MG-X-002-137
Couldn't load pickup availability
MetaGuard MG-X is a cylinder-cast soft PVC overlaminate matched with MetaWrap MD-X print film. The matched system is intended for vehicle graphics over compound curves and moderate recesses, subject to the manufacturer’s processing and application instructions. Its permanent clear solvent-based acrylic adhesive contains UV inhibitors.
- Roll size: 54 in × 55 yd
- Film: Cylinder-cast soft PVC, 50 µm nominal
- Adhesive: Permanent clear solvent-based acrylic with UV inhibitors
- Release liner: Solventless kraft
- Matched print film: MetaWrap MD-X
Allow printed inks to cure and confirm suitability of the overlaminate for the print media. Follow the manufacturer’s cold-lamination and wrap-application guidance. Avoid overstretching the matched wrap system.
Configurations
- MG-X-002-137: Clear Matte / 54 in × 55 yd
- MG-X-005-137: Clear Gloss / 54 in × 55 yd
Manufacturer technical and application resources
- MetaGuard MG-X technical data sheet (PDF): family specifications, matched print film, ink-curing and lamination guidance.
- Application of Overlaminates (PDF): general laminator and handling guidance; the exact matched-system drying and installation instructions take precedence.
- MetaWrap MD-X vehicle-wrap application guide (PDF): installation guidance for the matched print-film and overlaminate system, not unrelated media.
- Metamark regional durability guide (PDF): climate-zone and exposure context; the family-sheet figures are not a blanket US finished-graphic guarantee.
- Cleaning and Maintenance of Vehicle Wraps (PDF): wrap-specific cleaning and aftercare precautions for printed graphics protected with a vinyl overlaminate.
Use the matched print-film and overlaminate instructions together. Allow the print to out-gas fully; the wrap-system drying requirement takes precedence over a shorter general interval. Follow the laminator, dry-installation and family-specific heat/post-heating directions. Test the actual ink, substrate and process.
This is MG-X, not MG-X-M. The MG-X sheet names solvent, eco-solvent and latex prints and also refers to UV in its application section; do not treat that as approval of every UV ink or unrelated print medium. The MD-X guide’s modest-recess limits remain applicable.
Manufacturer documents include metric family presentations and other constructions. They do not replace the exact US SKU, finish or roll dimensions listed above. These links do not create a bundled kit, guarantee stock availability or establish a finished-graphic warranty.
Matched films and overlaminates
The manufacturer matches MG-X with MD-X white gloss wrap film, 54 in × 55 yd. Both matte and gloss options on this page have the same 54-inch width and 55-yard length as that film.
This link is for MD-X, not MD-XB. The exact MD-X guide’s modest-recess limits still apply; choosing a wrap overlaminate does not expand the print film’s capabilities.
These recommendations are limited to solvent, eco-solvent and latex prints. Confirm the actual print system before use; the film’s ability to accept UV ink does not establish compatibility with every UV-printed laminate system.
Follow both product sheets and the matched wrap-system guide. Allow inks to cure fully, install dry, and use the specified fitting and post-heating process. Test the actual ink and surface. These links are for separately purchased rolls, not a bundled kit, a stock-availability promise or a finished-graphic warranty.
About the application photo: Manufacturer MetaGuard MG-X family application example. Representative graphics only; exact finish, US sale roll and packaging are not shown.
Selecting your material
Selecting your material
Select every available option, then check the size, color, SKU and price before adding to your cart. Product specifications and application information are included in the description above.
Need help matching a material or choosing a size? Call 330-747-6139 or text us.
Shipping & order questions
Shipping & order questions
Review the shipping and availability details for your selected item. For oversized rolls, unusual quantities or a delivery deadline, contact us before ordering so we can confirm the details.
