EasyWeed HTV Cream - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

• Cut in reverse (mirror)
• Weed excess material

 

Home Iron

 

• Set iron dial between Cotton and Linen
• Cover design with kraft paper or non-stick cover sheet
• Place on flat, HARD surface
• Press each section of design for 10-15 seconds
• If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
• Peel carrier hot or cold

 

Heat Press  (Recommended)

 

• Preheat Garment for 2-3 seconds
• Apply design at 305ºF / 150ºC
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

 

CARE

 

Applies to:

• Cotton
• Cotton-poly blends
• Polyester
• Leather

 

 

LAUNDERING

 

• Wait 24 hours before first wash
• Machine wash warm water or cold
• Mild Detergent
• Dry on normal dryer setting

 

 

Manufacturer resources

Use the standard EasyWeed section and the guide column for your exact cutter model. Cutter settings are starting points; perform a test cut before production. Do not transfer a preset from one cutter model or generation to another. The printable EasyWeed guide permits warm or cold washing, while Siser’s product page specifies cold washing. Color charts are references and do not establish exact color matching or local stock availability.

• Siser EasyWeed product information and colors
• Printable application and care instructions: EasyWeed, page 1
• Cutter starting settings: EasyWeed row, page 1
• Siser color brochure: EasyWeed, page 7

Additional care guidance from Siser: avoid bleach, dry cleaning and liquid fabric softener. Turn the garment inside out for washing.