• Supermarket-themed graphics on an indoor facade, from the Metamark MD5-A gallery.
1 1

Metamark

Metamark MD5-A White Gloss MetaScape Print Vinyl, 54 in × 50 yd

Metamark MD5-A White Gloss MetaScape Print Vinyl, 54 in × 50 yd

MD5A-100-137-50Y

$353.67 USD
$353.67 USD
Sale Sold out
Shipping calculated at checkout.

MD5-A is a polymeric calendered vinyl for printed graphics on smooth flat or slightly curved surfaces. Its permanent MetaScape adhesive has air channels to help air escape and allows positioning during application. The family is matched with MetaGuard MG-700 overlaminates.

  • SKU: MD5A-100-137-50Y
  • Roll size: 54 in × 50 yd
  • Finish: White Gloss
  • Film: Polymeric calendered vinyl, 70 µm nominal
  • Adhesive: MetaScape permanent solvent-based acrylic with air channels
  • Release liner: Structured layflat kraft with PE coating, 140 gsm nominal
  • Matched overlaminate: MetaGuard MG-700 family

Apply dry and unstressed. Not suitable over rivets or complex recesses, or recommended for low-energy surfaces such as polypropylene. Test print, allow inks to cure and confirm substrate suitability.

Manufacturer technical and care resources

This MetaScape version is dry-application only. Apply without stretching; the sheet excludes rivets and complex recesses. Do not transfer wet-application permission from standard MD5 or MD5-B. Test the intended substrate and print process, use the correct print profile, and follow the sheet's drying guidance before laminating or installing. Drying can take longer than the stated minimum under some printing and drying conditions.

The sheet's unprinted-film durability reference is based on vertical Northern European exposure, not a blanket US or finished-graphic guarantee. Use the regional guide for the actual location and exposure, and verify the complete ink, film and laminate system.

These manufacturer family documents show metric roll presentations and other family choices. The offered configuration here remains 54 in x 50 yd, as listed above; the documents do not change that SKU, finish, adhesive or roll length. A family-level MG-700 reference does not establish a verified available US laminate SKU or size.

Matched matte overlaminate

Metamark identifies MetaGuard MG-700 Series as the matched overlaminate family for MD5-A. The MG702 clear matte overlaminate, 54 in × 50 yd has the same listed 54-inch width as this print film. Choose it when a matte finish is wanted.

This matched-family recommendation is limited to solvent, eco-solvent and latex prints on flat or slightly curved graphics. Allow the print to cure fully before laminating and test the actual print, laminate and substrate. UV inhibitors in the laminate do not establish suitability for UV-cured inks; no UV-print recommendation or general system warranty is made here.

For installation onto the substrate, MD5-A uses MetaScape air-release adhesive and requires dry application. Do not use a general wet-lamination statement as permission to wet-apply this print film.

Both listed rolls are 50 yards long. Plan the usable printed length and allowance for setup and trimming rather than assuming every yard can be laminated.

About the application photo: Manufacturer MD5-A family application example. Representative graphics only; exact finish, US sale roll and packaging are not shown.

Selecting your material

Select every available option, then check the size, color, SKU and price before adding to your cart. Product specifications and application information are included in the description above.

Need help matching a material or choosing a size? Call 330-747-6139 or text us.

Shipping & order questions

Review the shipping and availability details for your selected item. For oversized rolls, unusual quantities or a delivery deadline, contact us before ordering so we can confirm the details.

Contact Great Lakes Graphic Supply

View full details