{"product_id":"metamark-metawrap-md-x-white-gloss-cylinder-cast-wrap-film-54-in-x-55-yd","title":"Metamark MetaWrap MD-X White Gloss Cylinder Cast Wrap Film, 54 in × 55 yd","description":"\u003cp\u003eMetaWrap MD-X is a cylinder-cast printable film for vehicle graphics over compound curves and moderate recesses. Its permanent grey MetaScape adhesive provides air-release channels and helps limit substrate show-through. The family is matched with MetaGuard MG-X overlaminate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MD-X-100-137\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll size:\u003c\/strong\u003e 54 in × 55 yd\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White Gloss (with Air-Egress)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilm:\u003c\/strong\u003e Cylinder-cast vinyl, 50 µm nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e MetaScape permanent grey solvent-based acrylic with air-release channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease liner:\u003c\/strong\u003e Structured layflat kraft with PE coating, 140 gsm nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched overlaminate:\u003c\/strong\u003e MetaGuard MG-X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTest print and confirm substrate suitability. Allow inks to cure before lamination or vehicle application. Install dry, follow the manufacturer’s heat and post-heating guidance, and avoid overstretching.\u003c\/p\u003e\n\n\u003csection id=\"glgs-md-x-100-137-new-resources\" class=\"glgs-product-resources\"\u003e\n\u003ch2\u003eManufacturer technical and application resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0916\/9158\/1769\/files\/Technical_data_Sheet_-_MDX_-_V1.2_26.pdf?v=1778661310\"\u003eMetaWrap MD-X technical data sheet (PDF)\u003c\/a\u003e: V1.2_26; exact family construction, printing, drying, dry application and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0916\/9158\/1769\/files\/Application_Guidelines_-_MDX.pdf?v=1768476809\"\u003eMetaWrap MD-X vehicle-wrap application guide (PDF)\u003c\/a\u003e: surface preparation, panel layout, installation and post-heating for this matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0916\/9158\/1769\/files\/Reference_material_-_Metamark_Durability_Guide.pdf?v=1755610044\"\u003eMetamark regional durability guide (PDF)\u003c\/a\u003e: climate-zone and exposure context; the family-sheet figures are not a blanket US finished-graphic guarantee.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0916\/9158\/1769\/files\/Reference_material_-_Cleaning_and_Maintenance_of_Vehicle_wrap.pdf\"\u003eCleaning and Maintenance of Vehicle Wraps (PDF)\u003c\/a\u003e: wrap-specific cleaning and aftercare precautions for printed graphics protected with a vinyl overlaminate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse the product-specific sheet and wrap guide together. Install dry, allow the printed film to out-gas fully before laminating and installing, and follow the family-specific fitting and post-heating instructions. A shorter general lamination drying interval must not replace the wrap-system guidance. Test the actual substrate and print process; do not overstretch.\u003c\/p\u003e\n\u003cp\u003eThe guide distinguishes air-release MD-X for modest recesses from MD-XB for deeper recesses. This white gloss MD-X-100-137 is not MD-XB or the non-MetaScape clear MD-X option.\u003c\/p\u003e\n\u003cp\u003eManufacturer documents include metric family presentations and other constructions. They do not replace the exact US SKU, finish or roll dimensions listed above. These links do not create a bundled kit, guarantee stock availability or establish a finished-graphic warranty.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"glgs-mdx-54-matched-companions\" class=\"glgs-product-companions\"\u003e\n\u003ch2\u003eMatched films and overlaminates\u003c\/h2\u003e\n\u003cp\u003eFor this 54 in × 55 yd MD-X white gloss film, the manufacturer names MetaGuard MG-X as its matched overlaminate. Choose the same-width, same-length \u003ca href=\"\/products\/metamark-metaguard-mg-x-clear-matte-and-gloss-cylinder-cast-overlaminate-54-in-x-55-yd?variant=50500498129034\"\u003eMG-X clear matte, 54 in × 55 yd\u003c\/a\u003e or \u003ca href=\"\/products\/metamark-metaguard-mg-x-clear-matte-and-gloss-cylinder-cast-overlaminate-54-in-x-55-yd?variant=50500498391178\"\u003eMG-X clear gloss, 54 in × 55 yd\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUse the MD-X guide’s modest-recess limits; do not transfer the deeper-recess guidance for MD-XB to this film.\u003c\/p\u003e\n\u003cp\u003eThese recommendations are limited to solvent, eco-solvent and latex prints. Confirm the actual print system before use; the film’s ability to accept UV ink does not establish compatibility with every UV-printed laminate system.\u003c\/p\u003e\n\u003cp\u003eFollow both product sheets and the matched wrap-system guide. Allow inks to cure fully, install dry, and use the specified fitting and post-heating process. Test the actual ink and surface. These links are for separately purchased rolls, not a bundled kit, a stock-availability promise or a finished-graphic warranty.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cp class=\"glgs-representative-application-photo\"\u003e\u003cstrong\u003eAbout the application photo:\u003c\/strong\u003e Manufacturer MetaWrap MD-X family application example. Representative graphics only; exact finish, US sale roll and packaging are not shown.\u003c\/p\u003e","brand":"Metamark","offers":[{"title":"White Gloss (with Air-Egress) \/ 54 in × 55 yd","offer_id":50500496523402,"sku":"MD-X-100-137","price":442.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/glgs-metamark-application-0236b0d62897.jpg?v=1792586437","url":"https:\/\/greatlakesgraphicsupply.com\/products\/metamark-metawrap-md-x-white-gloss-cylinder-cast-wrap-film-54-in-x-55-yd","provider":"Great Lakes Graphic Supply","version":"1.0","type":"link"}