EasyWeed HTV

EasyWeed HTV White - 15" x 12" - Sheet
EasyWeed HTV White - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV White - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Sold Out
EasyWeed HTV Black - 15" x 12" - Sheet
EasyWeed HTV Black - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Black - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Sold Out
EasyWeed HTV Royal Blue - 15" x 12" - Sheet
EasyWeed HTV Royal Blue - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Royal Blue - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Navy Blue - 15" x 12" - Sheet
EasyWeed HTV Navy Blue - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Navy Blue - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Red - 15" x 12" - Sheet
EasyWeed HTV Red - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Red - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Yellow - 15" x 12" - Sheet
EasyWeed HTV Yellow - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Yellow - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Green - 15" x 12" - Sheet
EasyWeed HTV Green - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Green - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Orange - 15" x 12" - Sheet
EasyWeed HTV Orange - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Orange - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Pink - 15" x 12" - Sheet
EasyWeed HTV Pink - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Pink - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Sky Blue - 15" x 12" - Sheet
EasyWeed HTV Sky Blue - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Sky Blue - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Brown - 15" x 12" - Sheet
EasyWeed HTV Brown - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Brown - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Gold - 15" x 12" - Sheet
EasyWeed HTV Gold - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Gold - 15" x 12" - Sheet
$5.75
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Silver - 15" x 12" - Sheet
EasyWeed HTV Silver - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Silver - 15" x 12" - Sheet
$5.75
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Burgundy - 15" x 12" - Sheet
EasyWeed HTV Burgundy - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Burgundy - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Purple - 15" x 12" - Sheet
EasyWeed HTV Purple - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Purple - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Lemon Yellow - 15" x 12" - Sheet
EasyWeed HTV Lemon Yellow - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Lemon Yellow - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Gray - 15" x 12" - Sheet
EasyWeed HTV Gray - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Gray - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Dark Green - 15" x 12" - Sheet
EasyWeed HTV Dark Green - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Dark Green - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Turquoise - 15" x 12" - Sheet
EasyWeed HTV Turquoise - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Turquoise - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Sun Yellow - 15" x 12" - Sheet
EasyWeed HTV Sun Yellow - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Sun Yellow - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Cream - 15" x 12" - Sheet
EasyWeed HTV Cream - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Cream - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Bright Red - 15" x 12" - Sheet
EasyWeed HTV Bright Red - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Bright Red - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Pale Blue - 15" x 12" - Sheet
EasyWeed HTV Pale Blue - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Pale Blue - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Lilac - 15" x 12" - Sheet
EasyWeed HTV Lilac - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Lilac - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Hibiscus - 15" x 12" - Sheet
EasyWeed HTV Hibiscus - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Hibiscus - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Green Apple - 15" x 12" - Sheet
EasyWeed HTV Green Apple - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Green Apple - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Light Pink - 15" x 12" - Sheet
EasyWeed HTV Light Pink - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Light Pink - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Vegas Gold - 15" x 12" - Sheet
EasyWeed HTV Vegas Gold - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Vegas Gold - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Cardinal - 15" x 12" - Sheet
EasyWeed HTV Cardinal - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Cardinal - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Maroon - 15" x 12" - Sheet
EasyWeed HTV Maroon - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Maroon - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Dark Maroon - 15" x 12" - Sheet
EasyWeed HTV Dark Maroon - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Dark Maroon - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Texas Orange - 15" x 12" - Sheet
EasyWeed HTV Texas Orange - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Texas Orange - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Chocolate - 15" x 12" - Sheet
EasyWeed HTV Chocolate - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Chocolate - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Lime - 15" x 12" - Sheet
EasyWeed HTV Lime - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Lime - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Bubble Gum - 15" x 12" - Sheet
EasyWeed HTV Bubble Gum - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Bubble Gum - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Charcoal - 15" x 12" - Sheet
EasyWeed HTV Charcoal - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Charcoal - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Tan - 15" x 12" - Sheet
EasyWeed HTV Tan - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Tan - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Powder Blue - 15" x 12" - Sheet
EasyWeed HTV Powder Blue - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Powder Blue - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Melon - 15" x 12" - Sheet
EasyWeed HTV Melon - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Melon - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Passion Pink - 15" x 12" - Sheet
EasyWeed HTV Passion Pink - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Passion Pink - 15" x 12" - Sheet
$5.50
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Fluorescent Yellow - 15" x 12" - Sheet
EasyWeed HTV Fluorescent Yellow - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Fluorescent Yellow - 15" x 12" - Sheet
$6.25
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Fluorescent Orange - 15" x 12" - Sheet
EasyWeed HTV Fluorescent Orange - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Fluorescent Orange - 15" x 12" - Sheet
$6.25
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Fluorescent Green - 15" x 12" - Sheet
EasyWeed HTV Fluorescent Green - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Fluorescent Green - 15" x 12" - Sheet
$6.25
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Fluorescent Pink - 15" x 12" - Sheet
EasyWeed HTV Fluorescent Pink - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Fluorescent Pink - 15" x 12" - Sheet
$6.25
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Fluorescent Blue - 15" x 12" - Sheet
EasyWeed HTV Fluorescent Blue - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Fluorescent Blue - 15" x 12" - Sheet
$6.25
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Fluorescent Raspberry - 15" x 12" - Sheet
EasyWeed HTV Fluorescent Raspberry - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Fluorescent Raspberry - 15" x 12" - Sheet
$6.25
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1
EasyWeed HTV Fluorescent Coral - 15" x 12" - Sheet
EasyWeed HTV Fluorescent Coral - 15" x 12" - Sheet

 

 

CUTTER SETTINGS

 

Cricut

Blade: Standard

Setting: Iron-on

 

Silhouette

Blade: Standard 3

Material: Heat Transfer Smooth

Speed:  8

Force:  6

 

Scan N Cut

Blade:  Standard 2

Cut Speed: 1

Cut Pressure: 1

 

Roland GC/GX-24

Blade: 45º

Gram Force: 80-90

Offset:  .250

Speed: 25-50 cm/s

 

Graphtec:

Blade: 45º

Gram force: 8-9

Tool:  CB09U+0

Speed:  30 cm/s

 

 

 

APPLICATION INSTRUCTIONS

 

  • Cut in reverse (mirror)
  • Weed excess material

 

Home Iron

 

  • Set iron dial between Cotton and Linen
  • Cover design with kraft paper or non-stick cover sheet
  • Place on flat, HARD surface
  • Press each section of design for 10-15 seconds
  • If area of designs lift after application, replace cover sheet and press for an additional 5-10 seconds.
  • Peel carrier hot or cold

 

Heat Press  (Recommended)

 

  • Preheat Garment for 2-3 seconds
  • Apply design at 305ºF / 150ºC
  • Use medium pressure for 10-15 seconds
  • Peel carrier hot or cold

 

CARE

 

Applies to:

  • Cotton
  • Cotton-poly blends
  • Polyester
  • Leather

 

 

LAUNDERING

 

  • Wait 24 hours before first wash
  • Machine wash warm water or cold
  • Mild Detergent
  • Dry on normal dryer setting

 

 

EasyWeed HTV Fluorescent Coral - 15" x 12" - Sheet
$6.25
Add to Cart
  • 1 lb
  • Available
  • Ships within 1-3 days1