{"title":"Genuine Graphtec Blades \u0026 Bundles","description":"\u003cp\u003eShop genuine Graphtec cutting blades and holder-and-blade bundles. Choose the correct CB09 or CB15 holder family and blade angle for your Graphtec cutter. Package contents are listed on each product page.\u003c\/p\u003e","products":[{"product_id":"graphtec-cb09ub-6-blade-bundle-3x2-pack","title":"Graphtec CB09UB 45° 0.9 mm Cutting Blades, 6-Blade Bundle (3 × 2-pack)","description":"\u003cp class=\"glgs-product-image-note\"\u003e\u003cstrong\u003eImage note:\u003c\/strong\u003e Single Graphtec CB09UB blade shown; supplied as 6 blades in three original 2-blade packs.\u003c\/p\u003e\n\u003cp\u003eIncludes 3 × 2-blade pack (CB09UB-2): 6 blades total. Original manufacturer packs remain intact.\u003c\/p\u003e\n\u003cp\u003eGraphtec CB09UB super-steel blades have a 45° cutting angle and 0.9 mm diameter. Designed for vinyl and self-adhesive marking film up to 0.25 mm thick.\u003c\/p\u003e\n\u003cp\u003eFor Graphtec CE8000, FC9000, FCX2000 and FCX4000 series cutters with the appropriate CB09-compatible holder. Follow the material limits and setup instructions for your cutter and holder.\u003c\/p\u003e\n\u003cp\u003eBlade-holder references for this blade family: PHP33-CB09N-HS and PHP35-CB09-HS. Select the holder for your exact cutter and blade combination and follow its blade-specific installation instructions. Holders and cutting machines are not included.\u003c\/p\u003e\n\n\u003csection class=\"glgs-product-resources\"\u003e\u003ch2\u003eProduct resources\u003c\/h2\u003e\n\u003cp\u003eUse the exact blade code when reading manufacturer charts. Regional angle labels may differ; the part code identifies the blade.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphteccorp.com\/cutting\/supply\/\"\u003eGraphtec blade-to-holder and cutter compatibility tables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/graphtecamerica.com\/wp-content\/uploads\/2026\/03\/CE8000BladeChart.pdf\"\u003eCE8000 blade and holder chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/graphtecamerica.com\/wp-content\/uploads\/2026\/03\/FC9000-Blades.pdf\"\u003eFC9000 blade and holder chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphtecamericapro.com\/tech\/wp-content\/uploads\/2026\/07\/CE8000-UsersManual.pdf\"\u003eCE8000 user manual: blade setup, media limits and test cuts (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphtecamericapro.com\/tech\/wp-content\/uploads\/2026\/08\/FC9000-UM-155-03-01-ENG_Protect.pdf\"\u003eFC9000 user manual: blade setup, media limits and test cuts (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003csection class=\"glgs-compatible-products\"\u003e\u003ch2\u003eCompatible Graphtec cutters\u003c\/h2\u003e\n\u003cp\u003eFor vinyl and self-adhesive marking film up to 0.25 mm thick, use PHP33-CB09N-HS or PHP35-CB09-HS with the listed cutters. Blade fit does not establish that every material can be cut. Check the exact cutter’s permitted media type, width, thickness and backing, then follow its blade setup instructions and perform test cuts before production. Blade holders and cutting machines are not included in this blade offer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-40-15-inch-desktop-cutting-plotter\"\u003eGraphtec CE8000-40\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-60-24-inch-cutting-plotter\"\u003eGraphtec CE8000-60\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-130-50-inch-cutting-plotter\"\u003eGraphtec CE8000-130\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-130akz-50-inch-automotive-cutting-plotter\"\u003eGraphtec CE8000-130AKZ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-75-30-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-75\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-100-42-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-140-54-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-140\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-160-64-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-160\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e","brand":"Graphtec","offers":[{"title":"6 blades total (3 × 2-pack)","offer_id":50500077027466,"sku":null,"price":232.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/CB09UB-blade__97504.1697232170.png?v=1792846791"},{"product_id":"graphtec-cb09ub-k60-6-blade-bundle-3x2-pack","title":"Graphtec CB09UB-K60 30° (US) 0.9 mm Cutting Blades, 6-Blade Bundle (3 × 2-pack)","description":"\u003cp class=\"glgs-product-image-note\"\u003e\u003cstrong\u003eImage note:\u003c\/strong\u003e Single Graphtec CB09UB-K60 blade shown; supplied as 6 blades in three original 2-blade packs.\u003c\/p\u003e\n\u003cp\u003eIncludes 3 × 2-blade pack (CB09UB-K60-2): 6 blades total. Original manufacturer packs remain intact.\u003c\/p\u003e\n\u003cp\u003eGraphtec CB09UB-K60 0.9 mm super-steel blades are designed for window tint and other thin films up to 0.25 mm thick.\u003c\/p\u003e\n\u003cp\u003eFor compatible Graphtec CE8000 and FC9000 setups using the appropriate CB09 blade holder. Follow the material limits and setup instructions for your cutter.\u003c\/p\u003e\n\u003cp\u003eGraphtec uses a 30° designation in US sources and a 60° designation in Japanese sources for this blade family.\u003c\/p\u003e\n\u003cp\u003eBlade-holder references for this blade family: PHP33-CB09N-HS and PHP35-CB09-HS. Select the holder for your exact cutter and blade combination and follow its blade-specific installation instructions. Holders and cutting machines are not included.\u003c\/p\u003e\n\n\u003csection class=\"glgs-product-resources\"\u003e\u003ch2\u003eProduct resources\u003c\/h2\u003e\n\u003cp\u003eUse the exact blade code when reading manufacturer charts. Regional angle labels may differ; the part code identifies the blade.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphteccorp.com\/cutting\/supply\/\"\u003eGraphtec blade-to-holder and cutter compatibility tables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/graphtecamerica.com\/wp-content\/uploads\/2026\/03\/CE8000BladeChart.pdf\"\u003eCE8000 blade and holder chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/graphtecamerica.com\/wp-content\/uploads\/2026\/03\/FC9000-Blades.pdf\"\u003eFC9000 blade and holder chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphtecamericapro.com\/tech\/wp-content\/uploads\/2026\/07\/CE8000-UsersManual.pdf\"\u003eCE8000 user manual: blade setup, media limits and test cuts (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphtecamericapro.com\/tech\/wp-content\/uploads\/2026\/08\/FC9000-UM-155-03-01-ENG_Protect.pdf\"\u003eFC9000 user manual: blade setup, media limits and test cuts (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003csection class=\"glgs-compatible-products\"\u003e\u003ch2\u003eCompatible Graphtec cutters\u003c\/h2\u003e\n\u003cp\u003eFor window tint and other thin films up to 0.25 mm thick, use PHP33-CB09N-HS or PHP35-CB09-HS with the listed cutters. Blade fit does not establish that every material can be cut. Check the exact cutter’s permitted media type, width, thickness and backing, then follow its blade setup instructions and perform test cuts before production. Blade holders and cutting machines are not included in this blade offer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-40-15-inch-desktop-cutting-plotter\"\u003eGraphtec CE8000-40\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-60-24-inch-cutting-plotter\"\u003eGraphtec CE8000-60\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-130-50-inch-cutting-plotter\"\u003eGraphtec CE8000-130\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-130akz-50-inch-automotive-cutting-plotter\"\u003eGraphtec CE8000-130AKZ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-75-30-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-75\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-100-42-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-140-54-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-140\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-160-64-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-160\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e","brand":"Graphtec","offers":[{"title":"6 blades total (3 × 2-pack)","offer_id":50500079583370,"sku":null,"price":232.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/CB09UB-K60-blade__98194.1637772503.png?v=1792846803"},{"product_id":"graphtec-cb15u-5-blade-pack","title":"Graphtec CB15U 45° 1.5 mm Cutting Blades, 5-Blade Pack (1 × 5-pack)","description":"\u003cp class=\"glgs-product-image-note\"\u003e\u003cstrong\u003eImage note:\u003c\/strong\u003e Single Graphtec CB15U blade shown; supplied as one original 5-blade pack.\u003c\/p\u003e\n\u003cp\u003eIncludes 1 × 5-blade pack (CB15U-5): 5 blades total. Original manufacturer packs remain intact.\u003c\/p\u003e\n\u003cp\u003eGraphtec CB15U super-steel blades have a 45° cutting angle and 1.5 mm diameter. Designed for rigid or thicker media in the 0.25–0.5 mm range.\u003c\/p\u003e\n\u003cp\u003eFor Graphtec CE8000, FC9000, FCX2000 and FCX4000 series with the correct CB15-compatible holder. Material limits and setup depend on the cutter and holder.\u003c\/p\u003e\n\u003cp\u003eBlade-holder references for this blade family: PHP33-CB15N-HS and PHP35-CB15-HS. Select the holder for your exact cutter and blade combination and follow its blade-specific installation instructions. Holders and cutting machines are not included.\u003c\/p\u003e\n\n\u003csection class=\"glgs-product-resources\"\u003e\u003ch2\u003eProduct resources\u003c\/h2\u003e\n\u003cp\u003eUse the exact blade code when reading manufacturer charts. Regional angle labels may differ; the part code identifies the blade.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphteccorp.com\/cutting\/supply\/\"\u003eGraphtec blade-to-holder and cutter compatibility tables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/graphtecamerica.com\/wp-content\/uploads\/2026\/03\/CE8000BladeChart.pdf\"\u003eCE8000 blade and holder chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/graphtecamerica.com\/wp-content\/uploads\/2026\/03\/FC9000-Blades.pdf\"\u003eFC9000 blade and holder chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphtecamericapro.com\/tech\/wp-content\/uploads\/2026\/07\/CE8000-UsersManual.pdf\"\u003eCE8000 user manual: blade setup, media limits and test cuts (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphtecamericapro.com\/tech\/wp-content\/uploads\/2026\/08\/FC9000-UM-155-03-01-ENG_Protect.pdf\"\u003eFC9000 user manual: blade setup, media limits and test cuts (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003csection class=\"glgs-compatible-products\"\u003e\u003ch2\u003eCompatible Graphtec cutters\u003c\/h2\u003e\n\u003cp\u003eFor rigid or thicker media in the 0.25–0.5 mm blade application range, use PHP33-CB15N-HS or PHP35-CB15-HS with the listed cutters. Blade fit does not establish that every material can be cut. Check the exact cutter’s permitted media type, width, thickness and backing, then follow its blade setup instructions and perform test cuts before production. The stated blade application range is not an unconditional cutting-thickness capability for any listed machine. Follow Graphtec’s blade-spring instructions for the selected holder; do not remove the holder’s built-in spring. Blade holders and cutting machines are not included in this blade offer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-40-15-inch-desktop-cutting-plotter\"\u003eGraphtec CE8000-40\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-60-24-inch-cutting-plotter\"\u003eGraphtec CE8000-60\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-130-50-inch-cutting-plotter\"\u003eGraphtec CE8000-130\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-ce8000-130akz-50-inch-automotive-cutting-plotter\"\u003eGraphtec CE8000-130AKZ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-75-30-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-75\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-100-42-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-140-54-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-140\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-160-64-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-160\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e","brand":"Graphtec","offers":[{"title":"5 blades total (1 × 5-pack)","offer_id":50500082040970,"sku":null,"price":230.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/CB15U-blade__53638.1715109089.png?v=1792846807"},{"product_id":"graphtec-cb15u-k30-4-blade-bundle-2x2-pack","title":"Graphtec CB15U-K30 60° (US) 1.5 mm Cutting Blades, 4-Blade Bundle (2 × 2-pack)","description":"\u003cp class=\"glgs-product-image-note\"\u003e\u003cstrong\u003eImage note:\u003c\/strong\u003e Manufacturer blade illustration; this bundle contains four CB15U-K30 blades in two original two-blade packs. Packaging is not shown.\u003c\/p\u003e\n\u003cp\u003eIncludes 2 × 2-blade pack (CB15U-K30-2): 4 blades total. Original manufacturer packs remain intact.\u003c\/p\u003e\n\u003cp\u003eGraphtec CB15U-K30 1.5 mm super-steel blades are designed for rigid media in the 0.25–0.5 mm range.\u003c\/p\u003e\n\u003cp\u003eFor compatible Graphtec FC9000, FCX2000 and FCX4000 setups with the appropriate CB15 blade holder. Check the exact cutter and material instructions before use.\u003c\/p\u003e\n\u003cp\u003eGraphtec labels this blade 60° in the USA and 30° in Japan.\u003c\/p\u003e\n\u003cp\u003eBlade-holder references for this blade family: PHP33-CB15N-HS and PHP35-CB15-HS. Select the holder for your exact cutter and blade combination and follow its blade-specific installation instructions. Holders and cutting machines are not included.\u003c\/p\u003e\n\n\u003csection class=\"glgs-product-resources\"\u003e\u003ch2\u003eProduct resources\u003c\/h2\u003e\n\u003cp\u003eUse the exact blade code when reading manufacturer charts. Regional angle labels may differ; the part code identifies the blade.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphteccorp.com\/cutting\/supply\/\"\u003eGraphtec blade-to-holder and cutter compatibility tables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/graphtecamerica.com\/wp-content\/uploads\/2026\/03\/FC9000-Blades.pdf\"\u003eFC9000 blade and holder chart (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.graphtecamericapro.com\/tech\/wp-content\/uploads\/2026\/08\/FC9000-UM-155-03-01-ENG_Protect.pdf\"\u003eFC9000 user manual: blade setup, media limits and test cuts (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003csection class=\"glgs-compatible-products\"\u003e\u003ch2\u003eCompatible Graphtec cutters\u003c\/h2\u003e\n\u003cp\u003eFor rigid media in the 0.25–0.5 mm blade application range, use PHP33-CB15N-HS or PHP35-CB15-HS with the listed cutters. Blade fit does not establish that every material can be cut. Check the exact cutter’s permitted media type, width, thickness and backing, then follow its blade setup instructions and perform test cuts before production. The stated blade application range is not an unconditional cutting-thickness capability for any listed machine. Follow Graphtec’s blade-spring instructions for the selected holder; do not remove the holder’s built-in spring. Blade holders and cutting machines are not included in this blade offer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-75-30-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-75\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-100-42-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-140-54-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-140\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/graphtec-fc9000-160-64-inch-professional-cutting-plotter\"\u003eGraphtec FC9000-160\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e","brand":"Graphtec","offers":[{"title":"4 blades total (2 × 2-pack)","offer_id":50500088037514,"sku":null,"price":238.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/glgs-9393742217354-manufacturer-blade-illustration.webp?v=1792881463"},{"product_id":"graphtec-blue-holder-4-genuine-45-degree-blades-bundle","title":"Graphtec Blue-Top CB09 Holder + 4 Genuine 45° Blades Bundle","description":"\u003cp\u003eA GLGS package of genuine Graphtec components: one blue-top PHP33-CB09N-HS 0.9 mm blade holder plus 4 genuine Graphtec 45° blades. The current holder has a black body with a blue identification band.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ordered quantity is one complete package containing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Graphtec PHP33-CB09N-HS blade-holder set\u003c\/li\u003e\n\u003cli\u003e2 × Graphtec CB09UB-2 factory two-packs — 2 blades per pack, 4 blades total\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe included CB09UB-2 blades are compatible with this PHP33-CB09N-HS holder. The 45° angle uses Graphtec America’s U.S. naming. Match your cutter and material application, and follow Graphtec’s blade-setting instructions before use.\u003c\/p\u003e\u003cp\u003eThese are genuine Graphtec blades, not GLGS-brand replacement blades. This is a GLGS component package, not a separately numbered Graphtec factory bundle. Ships from the supplier; inventory quantity refers to complete packages.\u003c\/p\u003e\u003cp\u003eThe manufacturer image shows the actual holder model and its blue identification band. The included blade packs are specified above and may not be shown in the image.\u003c\/p\u003e","brand":"Graphtec","offers":[{"title":"1 holder + 4 blades","offer_id":50564549279882,"sku":"GLGS-GR-PHP33-CB09-45-4B","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/graphtec-php33-cb09n-hs-1.jpg?v=1792961543"},{"product_id":"graphtec-red-holder-4-genuine-45-degree-blades-bundle","title":"Graphtec Red-Top CB15 Holder + 4 Genuine 45° Blades Bundle","description":"\u003cp\u003eA GLGS package of genuine Graphtec components: one red-top PHP33-CB15N-HS 1.5 mm blade holder plus 4 genuine Graphtec 45° blades. The current holder has a black body with a red identification band.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ordered quantity is one complete package containing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Graphtec PHP33-CB15N-HS blade-holder set\u003c\/li\u003e\n\u003cli\u003e2 × Graphtec CB15U-2 factory two-packs — 2 blades per pack, 4 blades total\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe included CB15U-2 blades are compatible with this PHP33-CB15N-HS holder. The 45° angle uses Graphtec America’s U.S. naming. Match your cutter and material application, and follow Graphtec’s blade-setting instructions before use.\u003c\/p\u003e\u003cp\u003eThese are genuine Graphtec blades, not GLGS-brand replacement blades. This is a GLGS component package, not a separately numbered Graphtec factory bundle. Ships from the supplier; inventory quantity refers to complete packages.\u003c\/p\u003e\u003cp\u003eThe manufacturer image shows the actual holder model and its red identification band. The included blade packs are specified above and may not be shown in the image.\u003c\/p\u003e","brand":"Graphtec","offers":[{"title":"1 holder + 4 blades","offer_id":50564550426762,"sku":"GLGS-GR-PHP33-CB15-45-4B","price":304.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/graphtec-php33-cb15n-hs-1.jpg?v=1792961583"},{"product_id":"graphtec-red-holder-2-genuine-60-degree-blades-bundle","title":"Graphtec Red-Top CB15 Holder + 2 Genuine 60° Blades Bundle","description":"\u003cp\u003eA GLGS package of genuine Graphtec components: one red-top PHP33-CB15N-HS 1.5 mm blade holder plus 2 genuine Graphtec 60° blades. The current holder has a black body with a red identification band.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ordered quantity is one complete package containing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Graphtec PHP33-CB15N-HS blade-holder set\u003c\/li\u003e\n\u003cli\u003e1 × Graphtec CB15U-K30-2 factory two-pack — 2 blades per pack, 2 blades total\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe included CB15U-K30-2 blades are compatible with this PHP33-CB15N-HS holder. The 60° angle uses Graphtec America’s U.S. naming. Match your cutter and material application, and follow Graphtec’s blade-setting instructions before use.\u003c\/p\u003e\u003cp\u003eThese are genuine Graphtec blades, not GLGS-brand replacement blades. This is a GLGS component package, not a separately numbered Graphtec factory bundle. Ships from the supplier; inventory quantity refers to complete packages.\u003c\/p\u003e\u003cp\u003eThe manufacturer image shows the actual holder model and its red identification band. The included blade packs are specified above and may not be shown in the image.\u003c\/p\u003e","brand":"Graphtec","offers":[{"title":"1 holder + 2 blades","offer_id":50564951146634,"sku":"GLGS-GR-PHP33-CB15-60-2B","price":224.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/graphtec-php33-cb15n-hs-1.jpg?v=1792961583"},{"product_id":"graphtec-blue-holder-4-genuine-30-degree-blades-bundle","title":"Graphtec Blue-Top CB09 Holder + 4 Genuine 30° Blades Bundle","description":"\u003cp\u003eA GLGS package of genuine Graphtec components: one blue-top PHP33-CB09N-HS 0.9 mm blade holder plus 4 genuine Graphtec 30° blades. The current holder has a black body with a blue identification band.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne ordered quantity is one complete package containing:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × Graphtec PHP33-CB09N-HS blade-holder set\u003c\/li\u003e\n\u003cli\u003e2 × Graphtec CB09UB-K60-2 factory two-packs — 2 blades per pack, 4 blades total\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe included CB09UB-K60-2 blades are compatible with this PHP33-CB09N-HS holder. The 30° angle uses Graphtec America’s U.S. naming. Match your cutter and material application, and follow Graphtec’s blade-setting instructions before use.\u003c\/p\u003e\u003cp\u003eThese are genuine Graphtec blades, not GLGS-brand replacement blades. This is a GLGS component package, not a separately numbered Graphtec factory bundle. Ships from the supplier; inventory quantity refers to complete packages.\u003c\/p\u003e\u003cp\u003eThe manufacturer image shows the actual holder model and its blue identification band. The included blade packs are specified above and may not be shown in the image.\u003c\/p\u003e","brand":"Graphtec","offers":[{"title":"1 holder + 4 blades","offer_id":50564951408778,"sku":"GLGS-GR-PHP33-CB09-30-4B","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2610\/9322\/files\/graphtec-php33-cb09n-hs-1.jpg?v=1792961543"}],"url":"https:\/\/greatlakesgraphicsupply.com\/collections\/genuine-graphtec-blades-bundles.oembed","provider":"Great Lakes Graphic Supply","version":"1.0","type":"link"}